Doweling Jigs

Trask Doweling Jig Jig features automatic self-centering action to assure accurate center drilling every time, even on round objects. The jig has a two inch capacity, and drill guides are hardened for years of use. This model has five permanent drill holes in sizes 1/4.

.

Smart doweling Jig Model No. SD373 Made in the USA. This doweling jig was first introduced to the public in 1999 at the LA Wood Show. It was quite a hit.

First of all it works on a common center principle rather than an actual center. Most of the stock today is not exactly the same thickness. This jig will insure that at least on side will be flat in the stock in not the same.

Drill the holes at the same time. That means the alignment of the stock is done quickly. Just make sure the ends of the boards are flush with each other and the rest is automatic. You can join edge to end of a surface joint, edge to inside surface, it works great on miter joints like picture frames, and of course edge to edge for panel making. You can even dowel a 3/8" dowel pin into a 1/2" stock.

A supply of dowel pins is standard equipment, as is instructions.