These Sherline arbors are not designed to be used on Sherline lathes,
but rather are specifically suited to the types of lathes often
used by jewelers and watch makers. Though highly accurate,
these machines are often not very versatile.
The 3/4-16 arbors provide a way to mount a Sherline 3-jaw
or 4-jaw chuck to this type of lathe. The 3/8-24 arbors allow
a 1/4" or 3/8" drill chuck to be mounted.The ability to mount
these chucks adds a great deal of versatility to this type of
special-purpose tool.
With use of a 8 mm adapter (P/N 1156) either of the 8 mm
arbors can also be used on Sherline lathes, although the
normal system for mounting chucks is recommended.
2091 Sherline 10.0 mm"D" Collet to 3/4-16 Thread Instructions
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13