Sherline Mill 5410-CNC Sherline Vertical Milling Machine CNC Ready (Metric)
- 3 stepper motor mounts factory installed
(Stepper motors, software, drivers and computer NOT included)
Sherline's most popular mill. It comes equipped with all of Sherline’s standard features upgraded to include a
- Laser engraved 12" (305mm) solid aluminum base for 2" or additional Y-axis travel
- Z axis oiler and a Y axis lead screw cover
- Laser engraved scales on the table and base
- 2-1/2" (63mm) adjustable “zero” handwheel on the Z-axis
- 2" (51mm) adjustable “zero” handwheels on the X- and Y-axes
- 1297 mill headstock spacer to provide more throat distance
- 3072 1/4" drill chuck and drawbolt
- Precision machined dovetailed slides with adjustable gibs
- Permanently lubricated spindle bearings
- Adjustable preload anti-backlash feed screws
- High-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes.
- A second pulley position is also available to provide extra torque at low RPM if needed.
Many other features found only on the best commercial machines.
feeds calibrated in .001" increments,
a high-torque DC motor with variable speed control. The
speed control is internally equipped with a converter that automatically adjusts between inputs of 100 VAC to 240 VAC, 50-60 Hz. without loss of torque
Speed is continuously variable from 70 to 2800 RPM without gear or belt changes.
A second pulley position is available for providing additional torque at low RPM
CNC-READY MACHINES: Any Sherline lathe or mill can be ordered with stepper motor mounts in place of the handwheels ready for the installation of NEMA 23 size stepper motors. (Stepper motors, drivers and software are not included.) Handwheels are included for use on the rear shaft of dual shaft stepper motors, but the stepper motors must be installed before manual control can be achieved. Machines equipped with stepper motor mounts are denoted by the machine or machine/accessory packages part number followed by the letters “CNC”.All accessories and handwheels that would normally come with that machine are included, but they are configured with stepper motor mounts on the crosslide and leadscrew, ready for your stepper motor and controls. The mounts feature a superior flexible coupler that is connected to the leadscrew through two ball bearings that are preloaded to eliminate play. This is a solid high quality mount.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13