Sherline 6210-CNC Ultimate Package (Metric)
The top of the line machine shop in one package!
- 5 stepper motor mounts factory installed
(Stepper motors, software, drivers and computer NOT included)
- 4400A deluxe 3.5" x 17" lathe package with chucks
- 2010 8-Directional milling machine
- Z axis oiler and a Y axis lead screw cover
- 3072 1/4" drill chuck
- 5330 safety glasses
- 1074 steady rest
- 1191 live center
- 3002 cutoff tool and holder
- 3007 1/4"HSS tool set
- 3021 center drill set
- 3020 Sherline T-driver
- 3060 mill collet set
- 3551 mill vise
- 3013 step block hold-down set
- 3079 3/8" end mill holder
- 7400 6 pc. 3/8" end mill set (double ended, 2-flute)
- 3052 fly cutter
- 3054 boring head
- 3063 boring tool
- 3750 tilting angle table
- 3700 4" rotary table
- 5327 Sherline Shop Guide Book
All Sherline mills feature precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed.
CNC-READY MACHINES: Any Sherline lathe or mill can be ordered with stepper motor mounts in place of the handwheels ready for the installation of NEMA 23 size stepper motors. (Stepper motors, drivers and software are not included.) Handwheels are included for use on the rear shaft of dual shaft stepper motors, but the stepper motors must be installed before manual control can be achieved. Machines equipped with stepper motor mounts are denoted by the machine or machine/accessory packages part number followed by the letters “CNC”.All accessories and handwheels that would normally come with that machine are included, but they are configured with stepper motor mounts on the crosslide and leadscrew, ready for your stepper motor and controls. The mounts feature a superior flexible coupler that is connected to the leadscrew through two ball bearings that are preloaded to eliminate play. This is a solid high quality mount.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13