SA180 Delta 1" Belt / 8" Disc Sander
- 3000 SFPM belt speed is ideal for metal grinding, deburring and sharpening, as well as sanding and buffing jobs.
- 8" diameter disc operates at 1725 RPM for finishing hard and soft woods, plastics, composites and more.
- Tilting cast-iron tables on belt and disc units are slotted for miter gauge use.
- Factory-set belt tensioning and one-knob belt tracking for accurate operation.
- Built-in, 1-1/2" I.D. dust spout for adaptation to a dust collection system or shop vacuum.
- The narrow belt width is ideal for sanding odd-shaped pieces. Steel platen is removable to facilitate working with curved pieces.
- Belt cover is removable for access to the idler wheel when performing contour sanding operations.
- Compound angles can be achieved on both units by tilting the table and utilizing the standard-equipment miter gauge. Miter gauge turns and locks for common angles 45º left and right.
Contents: Delta Model SA180 1" Belt / 8" Disc Sander with a 1/3 HP, 1725 RPM, 120 Volts, induction motor and controls; miter gauge, 1" x 42" 100-grit belt, 8" diameter and 60-grit disc.
SPECIFICATIONS
MOTOR:
- 1/3 HP, 120V, 1725 RPM induction
- Toggle switch with removable lock out key
SPEED:
- Belt: 3000 SFPM (914 SMPM)
- Disc: 1725 RPM
ABRASIVE BELT:
- Length: 42" (1067 mm)
- Width: 1" (25 mm)
DISC DIAMETER:
TABLE SIZE AND TILT:
- Belt: 6-1/8" x 7-1/8", tilts 45º out (156 x 181 mm)
- Disc: 4" x 10", tilts 45º in and out (102 x 254 mm)
DUST COLLECTOR OUTLETS:
OVERALL DIMENSIONS:
- Depth: 25-1/4" (641 mm)
- Width: 15" (381 mm)
- Height: 19-1/2" (495 mm)
WEIGHT: