CMT offers you the traditional approach to panel construction with the CMT Raised Panel Bit. Make classic raised panel doors as shown in the profile. The raised panel bit has a carbide tip and is equipped with the trademark orange PTFE Industrial Coating and an anti-kickback design to further increase your safety when working with larger diameter bits. Comes with ball bearing guides and is available in a 1/2" shank. This profile has an overal diameter of 3-1/4" (82.5 mm) and a cutting length of 19/32".
PR=C D=3-1/4" I=19/32" T=19/32 - 23/32" S=1/2"
Safety Tips: Horizontally employed bits should be used at a lower speed, between 10,000 and 12,000 RPMs. Three to five passes are recommended to safely and accurately obtain the profile you desire. To be used on jigs with at least 2-1/4 HP.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13