The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike. Admired for its attractiveness in exposed joint projects, the dovetail is remarkable strong and functional. CMT Dovetail bits are designed to fit all popular jigs including Leigh, Keller, JoinTECH and Omnijig systems.
Note: Pre-cut your dovetails with a straight bit to reduce bit breakage. Use a diameter slightly less than the small diameter at the neck of the dovetail bit. This will also improve chip removal and safety.
A CMT Dovetail Bit in a 1/4" shank. Has a cutting diameter of 5/16" (8 mm) and a cutting angle of 9º. The cutting length is 3/8". The overall length of the bit is 2-1/16". For Incra Jig.
D=5/16" I=3/8" A=9° L=2-1/16" S=1/4"
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13