Sherline Tool Part 45475 Motor (Hill House)<>BR>
Note: Internal brushes for this motor are none replaceable and not available for purchase separately.
Specifications:
Electric Motor Specifications from Manufacturer
- Type of enclosure: Totally enclosed, non-vented
- Duty rating: Continuous–10 oz. in. at 6100 rpm, .85 amperes;
- Intermittent–30 oz. in. at 5500 rpm, 1.75 amperes (5 minutes on / 15 minutes off)
- Output horsepower: .06 KW (60 W) at 10 oz. in. / 6100 rpm
- AC voltage (input): Normally 115 VAC, 60 Hz, Single Phase to a rectifier (Sherline electronic speed control converts any input from 100 VAC to 240 VAC, 50-60 Hz.)
- DC voltage: 90V DC to motor (60 Hz)
- Speed in rpm: 6100 rpm continuous
- Class of insulation: Class A, 105° (C.) insulation system
- Normal full load current: .85 amperes
- Starting current: 1.7 amperes instantaneous starting current (<100 milliamperes). This is also the stall current in True RMS
- Max current at time of changeover from lower speed to higher speed: Depends on load
- Type of motor: 3.00 inch (outer diameter) sub-fractional horsepower brush-type permanent magnet motor
- Temperature rise at ambient 50° C.: Less than or equal to 45° C.
- Motor frame size: 3 inches
- End use of motor: Drive unit for lathe or mill
-
- Shaft size: 5/16″
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13