Sherline Lathe model 4500C (4530 Metric) lathe is a standard model 4000 (4100) 3.5” x 8” lathe
- Two 2" resettable “zero” handwheels on the crosslide and feed screw
- 1041 2.5" 3-jaw self-centering chuck
- 1072 Jacobs 1/4" tailstock drill chuck w/ key
- 1074 Steady rest
- 1191 Live center
- 3002 Cutoff tool and holder
- 3007 3-piece ¼" HSS cutting tool set (LH, RH and Boring tool)
- 3020 5/32" Hex T-driver
- 3021 3-piece center drill set
- 5327 Sherline Accessories Shop Guide book.
- 1270 compound slide
- 3100 thread-cutting attachment
Standard equipment for the basic model 4000 (metric 4100)
- A powerful 90 VDC motor with electronic speed controller
- 2.75" (70mm) x 6.0" (152mm) crosslide
- 15" (381mm) steel bed to allow 8" (203mm) between centers
- Standard 1-5/8" (41mm) laser engraved aluminum handwheels
- Pulleys
- Belt
- Faceplate
- Lathe dog
- Two dead centers
- Three hexagonal keys
- Tool post
- Sharpened high-speed steel cutting tool
- Eight-foot, three-wire power cord
- Instruction booklet.
This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed
Sherline Lathe Package Model # 4500C Includes 4000B (4100B) lathe package above plus 1270 compound slide and 3100 thread cutting attachment. (Metric 4510C) adjustable zero handwheels substituted for standard handwheels
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13