YOU SAVE $65.00 over the price of these items purchased individually.
Sherline 4000B Lathe Package Inch
- Sherline Lathe 4000B Lathe 3.5" x 8"
- 1041 2.5" 3-jaw self-centering chuck
- 1072 Jacobs 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
- 1074 Steady rest
- 1191 Live center
- 3002 Cutoff tool and holder
- 3007 3-piece ¼" HSS cutting tool set (LH, RH and Boring tool)
- 3020 5/32" Hex T-driver
- 3021 3-piece center drill set
- 5327 Sherline Accessories Shop Guide book.
Standard equipment for the basic model 4000 (metric 4100)
- A powerful 90 VDC motor with electronic speed controller
- 2.75" (70mm) x 6.0" (152mm) crosslide
- 15" (381mm) steel bed to allow 8" (203mm) between centers
- Standard 1-5/8" (41mm) laser engraved aluminum handwheels
- Pulleys
- Belt
- Faceplate
- Lathe dog
- Two dead centers
- Three hexagonal keys
- Tool post
- Sharpened high-speed steel cutting tool
- Eight-foot, three-wire power cord
- Instruction booklet.
This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13