Sherline accessory offers a great variety of setup options. With the base mounted square to the mill table, parts mounted to the tilted table can be machined or drilled at precise angles. It can be set at any angle form 0 degrees to 90 degrees. The hole pattern in the table accepts Sherline's mill vise and rotary table. A threaded chuck mount is also included, which means parts from the lathe can have machining operations done on them without removing them from the chuck. They can then put back on the lathe for further operations without re-centering. With the rotary table mounted to the table and tilted, many additional machining possibilities are opened up. The pre-drilled and tapped hole pattern is laid out so that when the rotary table is rotated 90 degree position , its center is the same height as the rotary table tailstock. This eliminates the need for P/N 3701 right angle attachment. Base is 6" x 4" x 3/8"
3750 Sherline Tilting Angle Table Instructions
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13