Rotating Mill Vise Base, P/N 3570 When mounting the mill vise to the table, this base will allow the vise to be rotated to any angle. The red anodized base is laser engraved with angle measurements in 1 degree increments all the way around. witness marks are engraved o each side of the rotating collar that holds the vise.
The locking washer can be loosened, which allows the vise to slide forward and back in the fixture for further adjustment. A locking ring underneath pulls the collar down onto the base to lock it securely when the two hold-down screws are tightened.
The low profile tooling plate base only raises the height of the vise 1/2". Four T-nuts and hold-down bolts are included. The rotating vise base eliminates clamping and unclamping the vise to produce angles. Once mounted square to the table, the vise can be positioned using the laser engraved protractor scale as a guide for setting the angle. Properly positioned, the rotating base can even be used as a simple rotating table to drill or machine small, radially symmetrically patterns.
Sherline 3570 Rotary Mill Vise Base Instructions
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13