Sherline easy-to use end mill holders screw onto the threaded end of the mill spindle. End mills are held in place with a single set screw that tightens against the flat on the side of the cutter. These easy-to use end mill holders screw onto the threaded end of the mill spindle. End mills are held in place with a single set screw that tightens against the flat on the side of the cutter. Because of the ease of use of this type of cutter holder and the fact that it allows the use of longer or double-ended end mills, they are a great asset in your shop! In addition to end mills, special purpose cutters such as those designed for cutting key slots, dovetails, and corner radii usually have 3/8" diameter shanks. The Sherline end mill holder will increase the versatility of your milling machine by enabling you to hold these popular cutters. Caution! Always consider power and size limitations of your equipment when using larger cutters. You may want to reduce cutter speed.
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13