Sherline Two-position Tool Post saves time when you do not have to stop and change lathe tools several times while turning a part on the lathe. The change may be to switch from a left-hand to a right-hand tool, from a sharp-nosed tool to a radiused tool, or from a roughing tool to a finishing tool. Whatever the reason, each change requires a little setup time.
This time can be reduced by using a two-position tool post. Each Sherline two position tool post mounts two 1/4" lathe tools. By having one or more of these tool posts with your favorite lathe tools pre-mounted in them, you can simplify your work and reduce the time required to change tools.
3003 Sherline Two-position tool post, 1/4" Instructions
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13