Sherline Compound Slide offers a way to turn taper and cut angles on a lathe without rotating the headstock. Four mounting holes are provided in the base for solid positioning on the crosslide.. The rotating portion has a red anodized finish with laser engraved angles scales to make setting an angle easy. It utilizes a highly efficient locking ring design to lock it in position without having to over-tighten the locking screws. A 1/4" cutting tool can be mounted across the front or on either side of the head.
Unlike compounds used on full-size, conventional lathes, this one was designed to be used from the "back" side of the table. This allows it to be designed in a more compact size and used without interference from the crosslide handwheel. The lathe tool is inserted in the holder "upside down" so the cutting tip faces downward. Because of the small size of the miniature lathe, operating the crosslide handwheel in this position is just as convenient.
1280 Sherline Compound Slide (Metric) Instructions
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13