Sherline 1182 live center is the best way to support the end of a long piece held between centers in a lathe, but sometimes the piece may have a hole in the end of a long piece that is too large in which to index a standard live center. The Sherline bullnose live center will support parts or tubing with an open end as large as 1-5/8" diameter. Its solid steel bullnose center turns on two preloaded ball bearings. It is fitted with a #0 Morse taper to fit the tailstock spindle. Rather than turn a sleeve to size down a hole, this special live center can be fitted up in seconds when needed.
1182 Sherline Bullnose Live Center Instructions
CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.
I can do all this through him who gives me strength. Philippians 4:13